South Florida Fastest Growing Concrete Ready Mix Company

At Superior Mix we can create a concrete mix to fit the most exacting specifications. Whether you need product for a backyard patio or an interstate highway, our computerized batching system can formulate mixes to fit any need out of any one of our customers, and everything in between. We use only the finest aggregate and sand for top quality mixes that will stand the test of time.

Innovation

The quality doesn’t end once we mix the product in state-of-the-art ready mix trucks. The innovation continues throughout Superior Mix’s process – from scheduling of the job to dispatch and delivery to final placement. Concrete is perishable, so timing is critical. With Superior Mix, you can rest assured that the product will be delivered exactly when and where it’s needed.

Our Custom Built Software Solution includes:

  • Customer Portal to track orders and invoices
  • SMS Alerts to allow customer to know when the truck leave the plant.
  • Digitalized Trucks with Tablets ensuring they follow the best possible route.
  • Automated Statements and invoicing.
  • Integrated ERP

Products

Regular Mix

An ordinary concrete mixture. Uses for Sidewalks, driveways, walkways, pedestrian hardscapes, floors, pool decks and patios. World's most widely used building material.

Pea Rock Pump Mix

A concrete mixture designed with a small sized coarse aggregate that should be pumped. Uses for Floor toppings, columns or walls with tight reinforcements. Concrete can be placed in very tight areas.

Pea Rock Mix

A concrete mixture designed with a small sized coarse aggregate. Uses for Floor toppings, Columns or walls with tight reinforcement, other applications where #67 rock is too large. Concrete can be placed in very tight areas.

Stamp Mixtures

A concrete mixture designed to be stamped for decorative applications. Stamped concrete is concrete that is patterned to resemble brick, slate, flagstone, stone, tile and even wood. Uses for Sidewalks, driveways, walkways, pedestrian hardscapes, floors, pool decks and patios. Low maintenance, durability, pleasing hardscape and affordable cost — no grass and dirt will get between the brick or stone because stamped concrete is laid in one single monolithic pour.

Flowable Fill / CLSM

Controlled low-strength material (CLSM) is a self-compacted, cementitious material used primarily as a backfill in place of compacted fill. Uses for Backfill, structural fill and other uses such as filling-abandoned underground storage tanks, tunnel shafts and sewers. Ease of re-excavation, lower in-place cost in certain applications, worker safety, reduced maintenance, utility identification, reduced project scheduling and design flexibility.

Fibermesh

A polypropylene fiber mesh product added at the concrete plant that eliminates the use of wire mesh. Fiber gives consistent reinforcement throughout the concrete mix. It also reduces the square foot cost for the contractor. Fiber eliminates the labor associated with wire mesh. If fibermesh is not properly placed above the ground with chairs, it will lay on the bottom of the slab instead of in the middle where it needs to be to prevent shrinkage cracks. It should be noted that steel fibers are also available and can increase tensile strength, offer excellent crack control, reduce floor thickness and increase load bearing capacity.

Retarder

This slows down the hydration process and results in longer setting times. Retarder is commonly used in hot weather conditions as it slows down the finishing process. When the temperature is above 85 degrees or when concrete is being placed in direct sun light in hot weather, the hydration process is greatly accelerated. Retarder helps to slow down the hydration process to provide enough time to place the concrete.

High Range Water Reducer (Superplasticizer)

Superplasticizer is a water reducing admixture that is added at the concrete plant. It produces a high slump and increases flowablity. Superplasticizer is commonly used for pumping concrete, high strength concrete and enabling the concrete to flow around rebar and matting. Superplasticizer is useful for getting concrete into tight areas such as corners and turns without using excessive water.

Color

Coloring agents can be added either on the job site or at the concrete plant. Colorin agents come in liquid and powder forms from Davis Colors or L.M. Scofield. There are over 50 colors to choose from. Coloring agents are ideal for driveways, patios, walkways and concrete stamping. Feel free to contact us for availability and color charts.